Wiped Film Distillation Mistake 2/3

Wiped Film Distillation Mistakes 2/3

Not purchasing a degassing stage

A lot of my posts have covered the topic of degassing. In fact, I wrote a whole series on the importance of degassing your feed material. If interested, head over to https://lnkd.in/gjQHSzPr and check out my blog page.

When it comes to purchasing a production unit, one of the biggest mistakes I see is not investing in a degassing stage. Most feed materials require degassing prior to wiped film distillation. If you don't degas you can expect these problems:

1. Vacuum pump damage and frequent replacement.
2. Reduced yields and purity
3. Significantly decreased throughput and capacity
4. Extra passes through the still

A degassing stage, like the one pictured here, can remove those trace lights and present the wiped film still with a "cleaned" feed. The problems mentioned above will be removed.

The reason companies make this mistake is the expense. A degassing stage costs almost as much as a wiped film still stage. This is because the stage has all of its own components. It has a hot oil circulator, chiller, cold trap, vacuum set, etc. The main difference is, instead of a still body and wiper motor system, it has a steel vacuum chamber.

Companies feel like they are being asked to pay twice as much for the system, but the functionality of the system depends on running clean feed. It is a misunderstanding of continuous distillation to not purchase this system. We are so used to taking a tiny bit of heads off at the beginning of a distillation and then proceeding to the main distillation. In a continuous setup, you are always distilling the most volatile component, because fresh feed is always entering the system.

As a final side note, I will say that Pope does make one of the best degassing stages in the industry. I've worked with a few different systems and have found their design to be very effective at removing lights and ensuring nothing escapes to foul up the next stage.

Pictures courtesy of Pope Scientific, Inc.

Next
Next

Wiped Film Distillation Mistake 1/3